Introduce of glass sand washing plant

What is the beneficiation process of glass sand washing plant?

The beneficiation process of 15 tons per hour glass sand production line is "raw ore-pre-screening-medium magnetic separation-scrubbing-desliming-coarse-grained classification-desliming-plate magnetic separation-high magnetic separation-fine-grained classification-dewatering" to produce wet quartz concentrate.
Glass sand washing plant

Which quartz sand ore is suitable for making glass?

Material suitable for mineral processing in glass sand production line: SiC, mullite, limestone, barite, potassium albite, wollastonite and dolomite

Which equipment should be used in glass sand washing plant?

Supporting products: scrubber, plate magnetic separator, obstructed settler, hydraulic classifier, dewatering screen, desliming bucket

What are the advantages of glass sand production line?

1. High purity and pollution-free
Reasonable process and equipment are adopted, which greatly saves power consumption and realizes zero discharge of sewage and dust.
2. Large output and uniform product size
Sanding rate is higher. The whole production process is classified by screen, blocked and classifier for many times, which not only improves the efficiency of production line, but also reduces the loss of raw ore and controls the tailings content.
3. Effective reduction of iron content in quartz sand
We have rich experience in quartz sand production line. The whole process is not only equipped with advanced iron removal equipment, but also controlled at the source to minimize the pollution of sand in the processing process.

评论

发表评论

此博客中的热门博文

Real thing!Quality requirements for quartz sand for ultra-white glass

Ultra-clear glass can achieve a transmittance of more than 91.5%, and its optical properties are widely used in solar power generation, solar thermal power generation, information display, architectural decoration, and smart agriculture. The iron content in the ultra-clear glass is 0.015% or less, and the high-quality ultra-clear glass for the photothermal glass for clean energy, the electronic glass for information display, and the like requires higher transmittance, and therefore requires silica sand has a lower iron content, which puts higher demands on the raw materials of glass. Among the ultra-white glass batch materials, quartz sand generally accounts for more than 60% of the weight ratio, which is the main factor affecting the iron content in the glass, and the melting temperature of the quartz sand is high, which determines the melting speed of the glass, so quartz sand in glass batch materials is the main research object. What are the requirements for the chemical co
阅读全文

Is the flotation processing ineffective? Have you taken these eight factors into consideration?

图片
In the process of flotation by flotation machine , there are many factors affecting the flotation effect, including iradjustable factors and adjustable factors. Non-adjustable factors refer to the nature of ore. Adjustable factors include grinding fineness, pulp concentration, pulp acidity and alkalinity, reagent system (prescription), pulp temperature, water quality, flotation time, etc. Do you know how these factors affect the flotation process? flotation machine 1. Ore properties Ore properties mainly include chemical composition, mineral composition, structure and structure, occurrence state of useful and harmful elements, physical and chemical properties of ore, etc. The fluctuation of raw ore grade will increase the difficulty of controlling flotation process conditions. Among them, the oxidation rate of ore has a great influence on flotation, mainly as follows: A. The oxidation of metal minerals and gangue minerals will change the original mineral and ore structur
阅读全文

How to choose the crusher in the silica sand processing?

图片
At present, the crushing of ore mainly relies on the mechanical force. The most common ones are as follows: 1. Crushing method: When two crushing working faces are used to press the material, the material is crushed. The characteristic of this method is that the force is gradually increasing and the scope of the force is large. 2. Splitting method: The material is broken by wedging the sharp teeth into the splitting force of the material. Its characteristic is that the action range of the force is concentrated and local rupture occurs. 3. Breaking method: When material is broken, it is broken by bending force concentrated in relative direction. This method is characterized by not only the splitting force at the point of external force, but also the bending force, so it is easy to break the ore. 4. Grinding method: The crushing working face moves relatively on the material, resulting in the shear force on the material. This force acts on the surface of the ore and is su
阅读全文